|
Professor Paul Buckley
De Focatiis D S A and Buckley C P, “Craze initiation in glassy polymers:
Quantifying the influence of molecular orientation” Polymer
(2011), doi:10.1016/j.polymer.2011.06.044.
Buckley C P and Lew C Y, “Biaxial
hot-drawing of poly(ethylene terephthalate): An experimental study
spanning the processing range” Polymer 52 (2011) 1803-1810.
De Focatiis D S A and Buckley C P, “Prediction
of frozen-in birefringence in oriented glassy polymers using a
molecularly aware constitutive model allowing for finite molecular
extensibility” Macromolecules 44 (2011) 3085-3095.
Li H X and Buckley C P, “Necking in
glassy polymers: effects of intrinsic anisotropy and structural
evolution kinetics in their viscoplastic flow” International
Journal of Plasticity 26 (2010) 1726-1745.
De Focatiis D S A, Abraham F and Buckley C P, “Multi-axial viscoelastic
deformation of carbon-black filled EPDM rubber” in “Constitutive
Models
for Rubber VI” (Heinrich G,
Kaliske M, Lion A and Reese S, Eds)
CRC
Press, Leiden, 2010.
De Focatiis D S A, Embery J and Buckley C P, “Large deformations in
oriented polymer glasses: Experimental study and a new glass/melt
constitutive model” Journal of Polymer Science: Part B: Polymer
Physics, 48 (2010) 1449-1463.
Buckley C P, Prisacariu C and Martin C, “Elasticity and inelasticity of
thermoplastic polyurethane elastomers: Sensitivity to chemical and
physical structure” Polymer, 51 (2010) 3213-3224.
Figiel L, Dunne F P E and Buckley C P, “Computational
modelling of
large deformations in layered-silicate/PET nanocomposites near the
glass transition” Modelling and Simulation in Materials
Science
and
Engineering, 18 (2010) 015001 (21pp).
Figiel L and Buckley C P, “On the
modelling of highly elastic flows of
amorphous thermoplastics” International Journal of Non-Linear
Mechanics” 44 (2009) 389-395.
Figiel L and Buckley C P, “Elastic
constants for an intercalated
layered-silicate/polymer nanocomposite using the effective particle
concept” Computational Materials Science, 44 (2009) 1332-1343.
Li H X and Buckley C P, “Evolution of
strain localization in glassy
polymers: A numerical study” International Journal of Solids
and
Structures 46 (2009) 1607-1623.
Prisacariu C, Scortanu E and Buckley C P, “Hard segment inelastic
effects on the stress-strain response of polyurethane elastomers based
on hard segments of variable geometry” International Journal of
Polymer
Analysis and Characterisation 14 (2009) 527-539.
De Focatiis D S A, Buckley C P and Hutchings L R, “Roles of chain length, chain architecture,
and time in the initiation of visible crazes in polystyrene”
Macromolecules, 41 (2008) 4484–4491.
Harkin-Jones E, Figiel L, Spencer P, Abu-Zurayk R, Al-Shabib W, Chan V,
Rajeev R, Soon K, Buckley P, Sweeney J, Menary G, Armstrong C, Assender
H, Coates P, Dunne F, McNally T, Martin P, “Performance enhancement of polymer
nanocomposites via multiscale modeling of processing and properties” Plastics,
Rubber and Composites, 37 (2008) 113-123.
Salisbury S T S, Buckley C P and Zavatsky A B, “Image-based non-contact method to measure
cross-sectional areas and shapes of tendons and ligaments” Measurement
Science and Technology, 19 (2008) 045705 (9pp).
De Focatiis D S A, Buckley, C P, “Determination
of craze initiation stress in very small polymer specimens”,
Polymer Testing, 27 (2008) 136-145.
Buckley C P, Prisacariu C, Caraculacu, A, “Novel triol-crosslinked polyurethanes and
their thermorheological characterization as shape-memory materials” Polymer,
48 (2007) 1388-1396.
Haughie D, Buckley C P and Wu J J, “The
integrity of welded interfaces in ultra high molecular weight
polyethylene: Part 2 – interface toughness”, Biomaterials, 27
(2006) 3875-3881.
Buckley C P, Haughie D and Wu J J, “The
integrity of welded interfaces in ultra high molecular weight
polyethylene: Part 1 – model”, Biomaterials, 27 (2006) 3178-3186.
Prisacariu C, Buckley CP and Caraculacu AA, “Synthesis and characterisation of novel
shape memory polyurethanes derived from 4,4’-dibenzyl diisocyanates”,
PU Magazine 3 (2006) 253-257.
Buckley CP, Prisacariu C, Caraculacu AA and Martin C “Inelasticity of hard-phase reinforced
elastomers: a study of copolyurethanes with varying hard and soft
segments” in “Constitutive Models for Rubber IV” (Austrell P-E
and Kari L, Eds) Balkema, Rotterdam, pp 465-470, 2005.
Prisacariu C, Buckley C P and Caraculacu A A “Mechanical response of dibenzyl-based
polyurethanes with diol chain extension”, Polymer, 46 (2005),
3884-3894.
O’Connor J J, Buckley C P and Wu J J
“Method of compression moulding of polymer powder and product produced”
US patent US6677515, 2004.
Buckley C P “Experimental methods for rubberlike solids” in “Mechanics and Thermomechanics of
Rubberlike Solids” (G Saccomandi and R W Ogden, Eds) CISM
publication 452, Springer Verlag, Vienna, pp 1-62, 2004.
Wu, J J and Buckley C P “Plastic
deformation of glassy polystyrene: a unified model of yield and the
role of chain length” J. Polymer Sci. Part B: Polymer Physics,
42 (2004) 2027-2040.
Buckley, C P, Dooling, P J, Harding J and Ruiz C “Deformation of thermosetting resins at
impact rates of strain. Part 2: constitutive model with rejuvenation” Journal
of the Mechanics and Physics of Solids, 52 (2004), 2355-2377.
Prisacariu C, Buckley C P and Caraculacu A A (2003) “Novel polyurethanes with tailored
properties induced by differences in crystallinity” Chem Bull
“Polytehnica” Univ Timisoara, 48 (2003) 53-56.
Prisacariu C, Buckley C P, Ilisch S and Caraculacu A A “Structural modifications in novel
thermoplastic polyurethanes as revealed by static and dynamic tensile
testing as a function of temperature” Chem Bull, Polytehnica
Univ Timisoara, 48 (2003), 57-60.
Dooling P J, Buckley C P, Rostami S and Zahlan N "Hot-drawing of poly(methyl methacrylate)
and simulation using a three-dimensional glass-rubber constitutive
model" Polymer, 43 (2002) 2451-2465.
Wu J J, Buckley C P and O'Connor J J "Mechanical
integrity of compression-moulded ultra-high molecular weight
polyethylene: effects of varying process conditions"
Biomaterials, 23 (2002) 3773-3783.
Wu J J, Buckley C P and O'Connor J J "Processing of ultra-high molecular weight
polyethylene: modelling the decay of fusion defects" Trans.I.Chem.E.
Part A, 80 (2002) 423-431.
|
