|
Professor Fionn Dunne
Dunne, F.P.E., Petrinic, N., Introduction to Computational
Plasticity, OUP, UK, June 2005. (Appendix: FORTRAN code)
Guest Editor for the Jnl. of Strain Analysis special issue on
Multiscale modelling of materials in processing, Vol 42, No 4, 2007.
Guest Editor for the Jnl. of Multiscale Modelling special issue on
Material Behaviour across the Length Scales, Vol. 1, No. 3&4, 2010.
Guest Editor for the Jnl. of Strain Analysis special issue on
Micro-mechanics: fundamentals of micro-deformation, texture and
failure, Vol 45, 391-399, 2010, 2010.
Manonukul, A., Dunne, F.P.E., Knowles, D., Williams, S.,
Multiaxial creep and cyclic plasticity in nickel-base alloy C263. Intl.
Jnl. of Plasticity, Vol 21, 1-20, 2005.
Peng, H.X., Dunne, F.P.E., Grant, P.S., Cantor, B., Dynamic
densification behaviour of matrix-coated fibre composites: Modelling
and Processing. Acta Materialia, Vol. 53, No. 3, 617-628, 2005.
Carmai, J., Dunne, F.P.E., A model for the consolidation of hexagonal
array matrix coated fibre composites. Mod. Simul. Mats. Sci. Eng., 13,
1005-1014, 2005.
Dini, D., Korsunsky, A.M., Dunne, F.P.E., Diffraction post-processor
for polycrystalline plasticity modelling. Mats. Sci. Forum, V524-525,
427-432, 2006.
Dunne, FPE, Lin J, Hayhurst, DR, Makin, J , Modelling creep,
ratchetting and failure in structural components subjected to
thermo-mechanical loading. Jnl. Theor. Appl. Mech., 44, 667-689, 2006.
Dunne, FPE, Wilkinson, A, Allen, R, Experimental and computational
studies of low cycle fatigue crack nucleation in a polycrystal. Intl.
Jnl. Plasticity, 23, 2, 273-295, 2007.
Dunne, FPE, Rugg, D, Walker, A, Lengthscale-Dependent, Elastically
Anisotropic, Physically-Based HCP Crystal Plasticity: Application to
Cold-Dwell Fatigue in Ti Alloys. Intl. Jnl. Plasticity, 23, 6,
1061-1083, 2007.
Dunne, F.P.E., Allen, R., Godfrey, S., Consolidation of Locally
Reinforced Composite Shafts using Multiscale Modelling. Jnl. Strain
Analysis, 42, 4, 201-214, 2007.
Dunne, FPE, Walker, A, Rugg, D, A systematic study of hcp crystal
orientation and morphology effects in polycrystal deformation and
fatigue. Proc. R. Soc. Lond., Vol. 463, No.
2082, 1467-1489, 2007.
Korsunsky, AM, Dini, D, Dunne, FPE, Walsh, MJ, Comparative assessment
of dissipated energy and other fatigue criteria. Intl. Jnl. Fatigue,
Vol 29, No. 9-11, 1990-1995, 2007.
Rugg, D, Dixon, M, Dunne, FPE, Effective structural unit size in
titanium alloys. Jnl. Strain Analysis, 42, 4, 269-279, 2007.
Dunne, FPE, Rugg, D, On the mechanisms of fatigue facet nucleation in
titanium alloys.
Fatigue and Fract. Engg Mats Struct., Vol 31, 949-958, 2008.
Gaskell, J, Dunne, FPE, Farrugia, D, Lin, J, A multiscale crystal
plasticity analysis of deformation in a two-phase steel. Jnl.
Multiscale Modelling, Vol. 1, 1-19, 2009.
Liang, H, Dunne, FPE, GND Accumulation in Bicrystal Deformation:
Crystal Plasticity Analysis and Comparison with Experiments. Intl. Jnl.
Mech. Sci., Vol 51, 326-333, 2009.
Britton, TB, Liang, H, Dunne, FPE and Wilkinson, AJ, The effect of
crystal orientation on the indentation response of commercially pure
titanium: experiments and simulations. Proc. R. Soc. Lond., Vol 466, No
2115, 695-719, 2010.
Figiel, L., Dunne, F.P.E., Buckley, C.P., Computational modelling of
large deformations in layered-silicate/PET nanocomposites near the
glass transition. Modelling Simul. Mater. Sci. Eng., Vol 18, 1-21, 2010.
McDowell, DL, Dunne, FPE, Microstructure sensitive computational
modelling of fatigue crack formation. Intl. Jnl. Fatigue, Vol 32, No 9,
1521-1542, 2010
Bache, MR, Dunne. FPE, Experimental and crystal plasticity studies of
deformation and crack nucleation in a titanium alloy. Jnl. Strain
Analysis, Vol 45, 391-399, 2010.
Tsutsumi, S, Toyosada, M, Dunne, F, Phenomenological cyclic plasticity
model for high cycle fatigue. Procedia Engineering,Vol 2, No 1,
139-146, 2010.
Vorster, WJJ, Dunne, FPE, Crystal Plasticity and Multiscale Modelling
of Superalloy Creep. Philos. Mag., to appear 2011.
Book Contributions
Figiel, L, Dunne, FPE, Buckley, CP, Multiscale Modelling of
Layered Silicate/PETNanocomposites during Solid-State Processing, in R.
Pyrz, J.C. Rauhe (Eds)
IUTAM Symposium in Modelling Nanomaterials and Nanosystems, Springer
Publ, Vol 13, pp19-26, 2009.
Dunne, FPE, Initial Stress in hcp polycrystals resulting from
anisotropy of thermal expansivity and its role in high and low cycle
fatigue, Euromech10, Pailaseau, France, 2010
Dunne, F.P.E., Fielding, L., Allen., R., Manonukul, A.,
“Experimental and computational studies of fatigue damage and crack
initiation”, in Proc. 11th Intl. Conf. on Fracture, Turin, Italy, paper
section 9, 5094-5098, March 2005.
Sarsfield, H., Keenan, R., Wang, L., Petrinic, N. and Dunne, F.P.E.,
“Preliminary investigation of the role of crystal plasticity in
predictive modelling of impact on aerospace structures”, Complas 2005,
Barcelona, Sept. 2005.
Carmai, J, Dunne, FPE, “Analysis of consolidation of matrix-coated
fibre composite by power law creep”, ASME Mats. Division, MD100,
229-234, 2005.
Dini, D, Regino, GM, Dunne, FPE, Korsunsky, AM, “Polycrystal
deformation: modelling and diffraction measurements
for the development of microscopic energy-based fatigue prediction
criteria, Mesomechanics 06, Porto, Portugal, July
2006.
Dini, D, Korsunsky, AM, Dunne, FPE, “Diffraction post-processor for
polycrystalline plasticity modelling”, ECRS7,
Berlin, Germany, 2006.
Carmai, J., Dunne, F.P.E., “Analysis of consolidation of matrix-coated
fibre composites by power law
creep”, ESAFORM ‘06, April 2006, Glasgow, UK.
Figiel, L, Dunne, FPE, Buckley, CP, “Modelling morphology evolution
during solid-state processing of clay/polymer
nanocomposites, 16th Intl. Conf. on Composite Materials (ICCM), 2007,
Kyoto, Japan.
Liang, H, Dunne, FPE, “Physically-based crystal plasticity modelling of
GND distributions in a bicrystal and in nanoindentation, 9th Intl.
Conf. on Computational Plasticity (Complas 09), Sept, 2007,
Barcelona, Spain (Eds. Onate, Owen, Suarez), pp433-436, 2007.
Dunne, FPE, Rugg, D, “Lengthscale, orientation and morphology effects
in fatigue crack nucleation in polycrystals”, in Advances in
Heterogeneous Material Mechanics (Eds Fan J, Chen, H), DEStech pubs,
Pennsylvania, pp 145-152, 2008.
Liang, H, Dunne, FPE, Wilkinson, AJ, “Physically based crystal
plasticity modelling of nano-indentation”, in Advances in Heterogeneous
Material Mechanics (Eds Fan J, Chen, H), DEStech pubs, Pennsylvania, pp
303-307, 2008.
Dunne, FPE, Peng, HX, “Metal Matrix Composites Processing: Multiscale
Modelling and Property Extraction”, Third International Conference on
Processing Materials for Properties (PMP-III), TMS (Eds. Brajendra
Mishra, Akio Fuwa, Paritud Bhandhubanyong), 2008.
Seiichiro Tsutsumi, Naoyuki Yamato, Koji Gotoh and Fionn Dunne, Crystal
Plasticity FE Analysis of Initiation of Local-plastic Strain in
Polycrystalline Metals, Proc. of 23rd Asian-Pacific Technical
Exchange and Advisory Meeting on Marine Structures (TEAM 2009), pp.1-7,
2009.
Seiichiro Tsutsumi, Naoyuki Yamato, Koji Gotoh and Fionn Dunne, Crystal
Plasticity FE Analysis on Initiation of Plastic Strain under
Macroscopically Elastic Stress State,Proc. of the Japan Society
of Naval Architects and Ocean Engineers, Paper ID:2009W-G2-1, Vol. 9W,
pp.83-84, 2009.
Modelling of Low Temperature, High Stress Creep in Nickel
Super-Alloys’, Vorster, WJ, Dunne, FPE, 1st Intl Conf. Mats. Modelling,
Dortmund, 2009.
Philip Littlewood, T Ben Britton, Angus J Wilkinson, Mario Nardone,
Hong Liang, Fionn Dunne, Mapping Geometrically Necessary Dislocation
Distributions in Deformed Ti alloys, Royal Microscopical Society, EBSD
Conference, Derby, March 2010.
A J Wilkinson F P E Dunne, H Liang, M Nardone, Rupert Allen, T B
Britton, P, D Littlewood, Experimental Studies and Crystal
Plasticity Simulations of Deformation, Heterogeneity near Grain
Boundaries. Invited presentation in Symposium on Structural Transitions
and Local Deformation Processes At and Near Grain Boundaries at
Material Science & Technology, October Pittsburg 2009
Dunne, FPE, Lengthscale, Orientation and Morphology Effects in Fatigue
Crack Nucleation in Polycrystals, TMS, San Diego, February 2011.
Dunne, FPE, Polycrystal Heterogeneity: Friend and Foe, 21st Intl.
Workshop on Computational Materials Modelling, Limerick, Aug. 2011
|
