Prof. Alexander Korsunsky - Recent Publications

Song, X., S. Y. Zhang, et al. (2010). “Strain Gradient Polycrystal Plasticity Analysis: Fe Modeling and Synchrotron X-Ray Diffraction.” International Journal of Modern Physics B 24(1-2): 10-17

Korsunsky, A. M., E. Bemporad, et al. (2010). “On the Measurement and Interpretation of Residual Stress at the Micro-Scale.” International Journal of Modern Physics B 24(1-2): 1-9.

Kim, K. and A. M. Korsunsky (2010). “Dissipated energy and fretting damage in CoCrAlY-MoS2 coatings.” Tribology International 43(3): 676-684.

Hofmann, F., B. Abbey, et al. (2010). “Intragranular Lattice Misorientation Mapping by Synchrotron X-Ray Micro-Beams: Laue Vs Energy-Resolved Laue Vs Monochromatic Reciprocal Space Analysis.” International Journal of Modern Physics B 24(1-2): 279-287.

Abbey, B., S. Y. Zhang, et al. (2009). “Feasibility study of neutron strain tomography.” Mesomechanics 2009 1(1): 185-188.

Belnoue, J. P., G. D. Nguyen, et al. (2009). “Consistent tangent stiffness for local-nonlocal damage modelling of metals.” Mesomechanics 2009 1(1): 177-180.
 
Dave, S., X. Song, et al. (2009). “Digital image correlation and finite element analysis of inter- and intra-granular deformation.” Mesomechanics 2009 1(1): 197-200.
 
Dini, D., X. Song, et al. (2009). “Residual strain analysis in polycrystalline aggregates using diffraction measurement and finite element modelling.” Journal of Strain Analysis for Engineering Design 44(1): 55-70.
 
Gaucherin, G., F. Hofmann, et al. (2009). “Crystal plasticity and hardening: a dislocation dynamics study.” Mesomechanics 2009 1(1): 241-244

Hofmann, F., X. Song, et al. (2009). “Probing intra-granular deformation by micro-beam Laue diffraction.” Mesomechanics 2009 1(1): 193-196.
 
Hofmann, F., X. Song, et al. (2009). “Synchrotron based reciprocal space mapping and dislocation substructure analysis.” Materials Letters 63(12): 1077-1081.
 
Jun, T. S., F. Hofmann, et al. (2009). “Triaxial residual strains in a railway rail measured by neutron diffraction.” Journal of Strain Analysis for Engineering Design 44(7): 563-568.
 
Jun, T. S., A. M. Venter, et al. (2009). “Eigenstrain analysis of non-uniformly shaped shot-peened samples.” Mesomechanics 2009 1(1): 151-154.

Korsunsky, A. M. (2009). “Analogy and Originality in the Context of Scientific Enquiry.” Imecs 2009: International Multiconference of Engineers and Computer Scientists, Vols I and Ii: 1396-1401.
 
Korsunsky, A. M. (2009). “Eigenstrain analysis of residual strains and stresses.” Journal of Strain Analysis for Engineering Design 44(1): 29-43.
 
Korsunsky, A. M. (2009). “On the Size Effects and Scale Transitions in the Strength and Failure of Materials and Structures.” Current Themes in Engineering Science 2008 1138: 23-34.

Korsunsky, A. M. and A. Constantinescu (2009). “The influence of indenter bluntness on the apparent contact stiffness of thin coatings.” Thin Solid Films 517(17): 4835-4844.
 
Korsunsky, A. M. and D. A. Hills (2009). “Residual Strain Analysis.” Journal of Strain Analysis for Engineering Design 44(1): I-IV.
 
Korsunsky, A. M., G. M. Regino, et al. (2009). “Inertia friction welds between nickel superalloy components: analysis of residual stress by eigenstrain distributions.” Journal of Strain Analysis for Engineering Design 44(2): 159-170.
 
Korsunsky, A. M., M. Sebastiani, et al. (2009). “Focused ion beam ring drilling for residual stress evaluation.” Materials Letters 63(22): 1961-1963.
 
Korsunsky, A. M., X. Song, et al. (2009). “Crack tip deformation fields and fatigue crack growth rates in Ti-6Al-4V.” International Journal of Fatigue 31(11-12): 1771-1779.
 
Luckhoo, H. T., T. S. Jun, et al. (2009). “Inverse eigenstrain analysis of residual stresses in friction stir welds.” Mesomechanics 2009 1(1): 213-216.
 
Prakash, D. G. L., M. J. Walsh, et al. (2009). “Crack growth micro-mechanisms in the IN718 alloy under the combined influence of fatigue, creep and oxidation.” International Journal of Fatigue 31(11-12): 1966-1977.
 
Rotundo, F. and A. M. Korsunsky (2009). “Synchrotron XRD study of residual stress in a shot peened Al/SiCp composite.” Mesomechanics 2009 1(1): 221-224.
 
Schneider, K., A. Schone, et al. (2009). “Investigation of changes in crystalline and amorphous structure during deformation of nano-reinforced semi-crystalline polymers by space-resolved synchrotron SAXS and WAXS.” Mesomechanics 2009 1(1): 159-162.
 
Sih, G. C., A. M. Korsunsky, et al. (2009). “Mesomechanics 2009 Foreword: Dissipation and damage across multiple scales in physical and mechanical systems.” Mesomechanics 2009 1(1): 1-3.

Venter, A. M., C. P. la Grange, et al. (2009). “Synchrotron investigations of non-uniformly shaped shot-peened samples.” Zeitschrift Fur Kristallographie: 315-320.
 
Vorster, W. J. J. and A. M. Korsunsky (2009). “Analysis of residual strain and stress states due to heat treatment and thermal processing.” Journal of Strain Analysis for Engineering Design 44(1): 71-91.
 
Vorster, W. J. J., S. A. Schwindt, et al. (2009). “Analysis of the spray field development on a vertical surface during water spray-quenching using a flat spray nozzle.” Applied Thermal Engineering 29(7): 1406-1416.
 
Vorster, W. J. J., M. W. D. Watt, et al. (2009). “Influence of Quenchant Hydrodynamics and Boiling Phase Incipient Temperature Shifts on Residual Stress Formation.” Heat Transfer Engineering 30(7): 564-573.
 
Zhang, S. Y., E. Godfrey, et al. (2009). “Materials Structure and Strain Analysis Using Time-of-flight Neutron Diffraction.” World Congress on Engineering 2009, Vols I and Ii: 1412-1419.
 
Zhang, S. Y., E. Godfrey, et al. (2009). “High-tech composites to ancient metals.” Materials Today 12(7-8): 78-84.
 
Song, X., I. Kyriakoglou, et al. (2009). “Analysis of residual stresses around welds in a combustion casing.” Mesomechanics 2009 1(1): 189-192

Song, X., S.Y. Zhang, D. Dini, and A.M. Korsunsky, Finite element modelling and diffraction measurement of elastic strains during tensile deformation of HCP polycrystals. Computational Materials Science, 2008. 44(1): p. 131-137.

Kim, K. and A.M. Korsunsky, Exponential evolution law of fretting wear damage in low-friction coatings for aerospace components. Surface & Coatings Technology, 2008. 202(24): p. 5838-5846.

Ma, L.F. and A.M. Korsunsky, Surface dislocation nucleation from frictional sliding contacts. International Journal of Solids and Structures, 2008. 45(22-23): p. 5936-5945.

Korsunsky, A.M., W.J.J. Vorster, S.Y. Zhang, M. Topic, and A.M. Venter, A beam-bending eigenstrain analysis of residual elastic strains in multi-scan laser-formed steel samples. Proceedings of the Institution of Mechanical Engineers Part C-Journal of Mechanical Engineering Science, 2008. 222(9): p. 1635-1645.

Nguyen, G.D. and A.M. Korsunsky, Development of an approach to constitutive modelling of concrete: Isotropic damage coupled with plasticity. International Journal of Solids and Structures, 2008. 45(20): p. 5483-5501.

Wang, M.F., X.G. Li, N. Du, Y.Z. Huang, and A. Korsunsky, Direct evidence of initial pitting corrosion. Electrochemistry Communications, 2008. 10(7): p. 1000-1004.

Korsunsky, A.M., A.R. Torosyan, and K. Kim, Development and characterization of low friction coatings for protection against fretting wear in aerospace components. Thin Solid Films, 2008. 516(16): p. 5690-5699.

Zhang, S.Y., A. Venter, W.J.J. Vorster, and A.M. Korsunsky, High-energy synchrotron X-ray analysis of residual plastic strains induced in shot-peened steel plates. Journal of Strain Analysis for Engineering Design, 2008. 43(4): p. 229-241.

Prakash, D.G.L., W.J.J. Vorster, S.Y. Zhang, and A.M. Korsunsky, A study of residual elastic strain distribution in an AZ91 Mg alloy bar loaded in four point bending. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, 2008. 571-572: p. 113-118.

Taran, Y.V., A.M. Balagurov, J. Schreiber, and A.M. Korsunsky, Neutron diffraction analysis of stresses in an in-plane biaxially-fatigued stainless steel sample of cruciform geometry. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, 2008. 571-572: p. 131-136.

Vorster, W.J.J., M.W. van der Watt, A.M. Venter, E.C. Oliver, and A.M. Korsunsky, Neutron diffraction measurement and finite element modelling of residual strains due to bath and spray quenching of AISI 316L stainless steel cylinders. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, 2008. 571-572: p. 137-142.

Korsunsky, A.M., A critical discussion of the sin(2)psi stress measurement technique. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, 2008. 571-572: p. 219-224.

Song, X., S.Y. Zhang, D. Dini, and A.M. Korsunsky, Inter-granular residual stresses in polycrystalline aggregates: finite element modelling and diffraction post-processing. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, 2008. 571-572: p. 271-276.

Song, X., S. Chardonnet, G. Savini, S.Y. Zhang, W.J.J. Vorster, and A.M. Korsunsky, Experimental/modelling study of residual stress in Al/SiCp bent bars by synchrotron XRD and slitting eigenstrain methods. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, 2008. 571-572: p. 277-282.

Zhang, S.Y., J. Schlipf, and A.M. Korsunsky, Analysis of residual stresses around 'dimpled' cold-expanded holes in aluminium alloy plates. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, 2008. 571-572: p. 295-300.

Jun, T.S., S.Y. Zhang, M. Golshan, M. Peel, D. Richards, and A.M. Korsunsky, Synchrotron energy-dispersive X-ray diffraction analysis of residual strains around friction welds between dissimilar aluminium and nickel alloys. Stress Evaluation in Materials Using Neutrons and Synchrotron Radiation, 2008. 571-572: p. 407-412.

Taran, Y.V., A.M. Balagurov, S.G. Sheverev, J. Schreiber, A.M. Korsunsky, W.J.J. Vorster, H. Bomas, and C. Stoeberl, Neutron diffraction investigation of an in-plane biaxial fatigued stainless steel sample of cruciform geometry. Journal of Physics-Condensed Matter, 2008. 20(10).