Journal papers

Copyright of the papers below rests with a variety of different parties. They are made available solely on the same basis that I would supply a single copy of a paper to an individual. It is up to you to ensure that your use of a paper does not infringe copyright law.

  1. Houlsby, G.T. (1979)
    "The Work Input to a Granular Material",
    Géotechnique, Vol. 29, No. 3, September, ISSN 0016-8505 , pp 354-358
    Request a copy by email | doi:10.1680/geot.1979.29.3.354
  2. Houlsby, G.T. and Wroth, C.P. (1980)
    "Strain and displacement discontinuities in soil",
    Proceedings of the ASCE, Journal of the Engineering Mechanics Division, Vol. 106, No. EM4, September, ISSN 0044-7951 , pp 753-771
    Request a copy by email
  3. Houlsby, G.T. (1982)
    "Theoretical Analysis of the Fall Cone Test",
    Géotechnique, Vol. 32, No. 2, June, ISSN 0016-8505 , pp 111-118
    Request a copy by email | doi:10.1680/geot.1982.32.2.111
  4. Nedderman, R.M., Tüzün, U., Savage, S.B. and Houlsby, G.T. (1982)
    "The Flow of Granular Materials - I, Discharge Rates from Hoppers",
    Chemical Engineering Science, Vol. 37, No. 11, ISSN 0009-2509 , pp 1597-1609
    Request a copy by email | doi:10.1016/0009-2509(82)80029-8
  5. Tüzün, U., Houlsby, G.T., Nedderman, R.M. and Savage, S.B. (1982)
    "The Flow of Granular Materials - II, Velocity Distributions in Slow Flow",
    Chemical Engineering Science, Vol. 37, No. 12, ISSN 0009-2509 , pp 1691-1709
    Request a copy by email | doi:10.1016/0009-2509(82)80042-0
  6. Savage, S.B., Nedderman, R.M., Tüzün, U. and Houlsby, G.T. (1983)
    "The Flow of Granular Materials - III, Rapid Shear Flows",
    Chemical Engineering Science, Vol. 38, No. 2, ISSN 0009-2509 , pp 189-195
    Request a copy by email | doi:10.1016/0009-2509(83)85001-5
  7. Graham, J. and Houlsby, G.T. (1983)
    "Anisotropic Elasticity of a Natural Clay",
    Géotechnique, Vol. 33, No. 2, June, ISSN 0016-8505 , pp 165-180
    1. Corrigendum: Géotechnique, Vol. 33, No. 3, September 1983, p 354
    Request a copy by email | doi:10.1680/geot.1983.33.2.165
  8. Houlsby, G.T. and Wood, D.M. (1983)
    Discussion on 'Wood, D.M. (1982) "Cone Penetrometer and the Liquid Limit", Géotechnique, Vol. 32, No. 2, June, pp 152-157',
    Géotechnique, Vol. 33, No. 4, December, ISSN 0016-8505 , p 463
    Request a copy by email | doi:10.1680/geot.1983.33.4.463
  9. Sloan, S.W. and Houlsby, G.T. (1984)
    "An Implementation of Watson's Algorithm for Computing 2-Dimensional Delaunay Triangulations",
    Advances in Engineering Software, Vol. 6, No. 4, ISSN 0141-1195 , pp 192-197
    Request a copy by email
  10. Houlsby, G.T. and Sloan, S.W. (1984)
    "Efficient Sorting Algorithms in FORTRAN 77",
    Advances in Engineering Software, Vol. 6, No. 4, ISSN 0141-1195 , pp 198-203
    Request a copy by email
  11. Randolph, M.F. and Houlsby, G.T (1984)
    "The Limiting Pressure on a Circular Pile Loaded Laterally in Cohesive Soil",
    Géotechnique, Vol. 34, No. 4, December, ISSN 0016-8505 , pp 613-623
    1. Reply to discussion by W.H. Ward: Géotechnique, Vol. 36, No. 3, September 1986, p 457
    Request a copy by email | doi:10.1680/geot.1984.34.4.613
  12. Houlsby, G.T. (1985)
    "The Use of a Variable Shear Modulus in Elastic-Plastic Models for Clays",
    Computers and Geotechnics, Vol. 1, No. 1, ISSN 0266-352X , pp 3-21
    Request a copy by email | doi:10.1016/0266-352X(85)90012-6
  13. Graham, J. and Houlsby, G.T. (1985)
    Discussion on 'Nakase, A. and Kamei, T. (1984) "Influence of Anisotropy of Deformation Modulus on Effective Stress Path", Soils and Foundations, Vol. 24, No. 2,
    Soils and Foundations, Vol. 25, No. 2, ISSN 0038-0806 , pp 158-160
    Request a copy by email
  14. Burd, H.J. and Houlsby, G.T. (1986)
    "A Large Strain Finite Element Formulation for One Dimensional Membrane Elements",
    Computers and Geotechnics, Vol. 2, No. 1, ISSN 0266-352X , pp 3-22
    Request a copy by email | doi:10.1016/0266-352X(86)90013-3
  15. Houlsby, G.T. (1986)
    "A General Failure Criterion for Frictional and Cohesive Materials",
    Soils and Foundations, Vol. 26, No. 2, ISSN 0038-0806 , pp 97-101
    Request a copy by email
  16. Love, J.P, Burd, H.J., Milligan, G.W.E. and Houlsby, G.T. (1987)
    "Analytical and Model Studies of Reinforcement of a Layer of Granular Fill on a Soft Clay Subgrade",
    Canadian Geotechnical Journal, Vol. 24, No. 4, ISSN 0008-3674 , pp 611-622
    Request a copy by email
  17. Teh, C.I. and Houlsby, G.T. (1987)
    Discussion on 'Baligh, M.M. (1986) "Undrained Deep Penetration, I: Shear Stresses", Géotechnique, Vol. 36, No. 4, December, pp 471-485',
    Géotechnique, Vol. 37, No. 4, December, ISSN 0016-8505 , pp 525-527
    Request a copy by email | doi:10.1680/geot.1987.37.4.525
  18. Houlsby, G.T. and Hitchman, R. (1988)
    "Calibration Chamber Tests of a Cone Penetrometer in Sand",
    Géotechnique, Vol. 38, No. 1, March, ISSN 0016-8505 , pp 39-44
    1. Reply to discussions by M. Fahey and K. Been, D. Horsfield and M.G. Jefferies, Géotechnique, Vol. 39, No. 4, December 1989, pp 729-731
    Request a copy by email | doi:10.1680/geot.1988.38.1.39
  19. Houlsby, G.T. and Withers, N.J. (1988)
    "Analysis of the Cone Pressuremeter Test in Clay",
    Géotechnique, Vol. 38, No. 4, December, ISSN 0016-8505 , pp 575-587
    Request a copy by email | doi:10.1680/geot.1988.38.4.575

    (Awarded the inaugural Geotechnical Research Medal, Institution of Civil Engineers, 1989)
  20. Houlsby, G.T., Milligan, G.W.E., Jewell, R.A. and Burd, H.J. (1989)
    "A New Approach to the Design of Unpaved Roads: Part I",
    Ground Engineering, Vol. 22, No. 3, April, ISSN 0017-4653 , pp 25-29
    1. Corrigendum: Ground Engineering, Vol. 22, No. 5, July 1989, p 26
    Request a copy by email
  21. Milligan, G.W.E., Jewell, R.A., Houlsby, G.T. and Burd, H.J. (1989)
    "A New Approach to the Design of Unpaved Roads: Part II",
    Ground Engineering, Vol. 22, No. 8, ISSN 0017-4653 , pp 37-42
    Request a copy by email
  22. Houlsby, G.T. (1989)
    Discussion on 'M.G. Jefferies (1988) "Determination of Horizontal Geostatic Stress in Clay with Self-Bored Pressuremeter", Canadian Geotechnical Journal, Vol. 25, No. 3, pp 559-573',
    Canadian Geotechnical Journal, Vol. 26, No. 4, ISSN 0008-3674 , pp 758-759
    Request a copy by email
  23. Burd, H.J. and Houlsby, G.T. (1990)
    "Finite Element Analysis of Two Cylindrical Expansion Problems Involving Near Incompressible Material Behaviour",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 14, ISSN 0363-9061 , pp 351-366
    Request a copy by email | doi:10.1002/nag.1610140504
  24. Yu, H.S. and Houlsby, G.T. (1990)
    "A New Finite Element Formulation for One-Dimensional Analysis of Elastic-Plastic Materials",
    Computers and Geotechnics, Vol. 9, No. 4, ISSN 0266-352X , pp 241-256
    Request a copy by email | doi:10.1016/0266-352X(90)90040-3
  25. Teh, C.I. and Houlsby, G.T. (1991)
    "An Analytical Study of the Cone Penetrometer Test in Clay",
    Géotechnique, Vol. 41, No. 1, January, ISSN 0016-8505 , pp 17-34
    1. Reply to discussion by M. Fahey and A. Lee Goh: Géotechnique, Vol. 42, No. 3, September 1992, pp 529-532
    Request a copy by email | doi:10.1680/geot.1991.41.1.17
  26. Yu, H.S. and Houlsby, G.T. (1991)
    "Finite Cavity Expansion in Dilatant Soils: Loading Analysis",
    Géotechnique, Vol. 41, No. 2, ISSN 0016-8505 , pp 173-183
    1. Reply to discussion by M. Manassero and corrigendum, Géotechnique, Vol. 42, No. 4, December 1992, pp 649-654
    Request a copy by email | doi:10.1680/geot.1991.41.2.173
  27. Schnaid, F. and Houlsby, G.T. (1991)
    "An Assessment of Chamber Size Effects in the Calibration of In Situ Tests in Sand",
    Géotechnique, Vol. 41, No. 3, September, ISSN 0016-8505 , pp 437-445
    Request a copy by email | doi:10.1680/geot.1991.41.3.437
  28. Houlsby, G.T. and Wroth, C.P. (1991)
    "The Variation of the Shear Modulus of a Clay with Pressure and Overconsolidation Ratio",
    Soils and Foundations, Vol. 31, No. 3, September, ISSN 0038-0806 , pp 138-143
    Request a copy by email
  29. Randolph, M.F., Leong, E.C. and Houlsby G.T. (1991)
    "One Dimensional Analysis of Soil Plugs in Pipe Piles",
    Géotechnique, Vol. 41, No. 4, December, ISSN 0016-8505 , pp 587-598
    Request a copy by email | doi:10.1680/geot.1991.41.4.587
  30. Houlsby, G.T. (1991)
    Discussion on 'S.J. Wheeler (1990) "Movement of Large Gas Bubbles in Unsaturated Fine-Grained Sediments", Marine Geotechnology, Vol. 9, No 2. pp 113-129',
    Marine Geotechnology, Vol. 10, No. 3/4, ISSN 0360-8867 , pp 371-373
    Request a copy by email
  31. Houlsby, G.T (1992)
    Discussion on 'Matsuoka, H., Hoshikawa, T. and Ueno, K. (1990) "A General Failure Criterion and Stress-Strain Relation for Granular Materials to Metals", Soils and Foundations, Vol. 30, No. 2, June, 119-127',
    Soils and Foundations, Vol. 32, No. 1, March, ISSN 0038-0806 , pp 230-231
    Request a copy by email
  32. Schnaid, F. and Houlsby, G.T. (1992)
    "Measurement of the Properties of Sand in a Calibration Chamber by the Cone Pressuremeter Test",
    Géotechnique, Vol. 42, No. 4, December, ISSN 0016-8505 , pp 587-601
    1. Reply to discussion by M. Manassero, Géotechnique, Vol. 44, No. 3, September 1994, pp 529-532
    Request a copy by email | doi:10.1680/geot.1992.42.4.587
  33. Bell, R.W., Houlsby, G.T. and Burd, H.J. (1993)
    "Suitability of Three Dimensional Finite Elements for Modelling Material Incompressibility Using Exact Integration",
    Communications in Numerical Methods in Engineering, Vol. 9, No. 4, April, ISSN 0748-8025 , pp 313-329
    Request a copy by email | doi:10.1002/cnm.1640090405
  34. Yu, H.S., Houlsby, G.T. and Burd, H.J. (1993)
    "A Novel Isoparametric Finite Element Displacement Formulation for Axisymmetric Analysis of Nearly Incompressible Materials",
    International Journal of Numerical Methods on Engineering, Vol. 36, No. 14, ISSN 0029-5981 , pp 2453-2472
    Request a copy by email | doi:10.1002/nme.1620361409
  35. Houlsby, G.T. and Carter, J.P. (1993)
    "The Effects of Pressuremeter Geometry on the Results of Tests in Clay",
    Géotechnique, Vol. 43, No. 4, December, ISSN 0016-8505 , pp 567-576
    1. Reply to discussion by M.G. Jefferies and D.A. Shuttle, Géotechnique, Vol. 95, No. 4, December 1995, pp 745-748
    Request a copy by email | doi:10.1680/geot.1993.43.4.567
  36. Houlsby, G.T. and Schnaid, F. (1994)
    "Interpretation of Shear Moduli from Cone-Pressuremeter Tests in Sand",
    Géotechnique, Vol. 44, No. 1, March, ISSN 0016-8505 , pp 147-164
    Request a copy by email | doi:10.1680/geot.1994.44.1.147
  37. Wheeler, S.J. and Houlsby, G.T. (1994)
    Discussion on 'P.R. Smith, R.J. Jardine and D.W. Hight (1992) "The Yielding of Bothkennar Clay", Géotechnique, Vol. 42, No. 2, June, pp 257-274',
    Géotechnique, Vol. 44, No. 2, June, ISSN 0016-8505 , pp 359-361
    Request a copy by email | doi:10.1680/geot.1994.44.2.359
  38. Yu, H.S. and Houlsby, G.T. (1995)
    "A Large Strain Analytical Solution for Cavity Contraction in Dilatant Soils",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 19, ISSN 0363-9061 , pp 793-811
    Request a copy by email | doi:10.1002/nag.1610191104
  39. Houlsby, G.T. (1997)
    "The Work Input to an Unsaturated Granular Material",
    Géotechnique, Vol. 47, No. 1, March, ISSN 0016-8505 , pp 193-196
    Request a copy by email | doi:10.1680/geot.1997.47.1.193
  40. Collins, I.F. and Houlsby, G.T. (1997)
    "Application of Thermomechanical Principles to the Modelling of Geotechnical Materials",
    Proceedings of the Royal Society of London, Series A, Vol. 453, ISSN 1364-5021 , pp 1975-2001
    Request a copy by email | doi:10.1098/rspa.1997.0107
  41. Houlsby, G.T. (1997)
    Discussion on 'D.A. Shuttle and M.G. Jefferies (1995) "A Practical Geometry Correction for Interpreting Pressuremeter Tests in Clay", Géotechnique, Vol. 45, No. 3, June, pp 549-553',
    Géotechnique, Vol. 47, No. 4, September, ISSN 0016-8505 , pp 879-880
    Request a copy by email | doi:10.1680/geot.1997.47.4.879
  42. Butterfield, R., Houlsby, G.T. and Gottardi, G. (1997)
    "Standardised Sign Conventions and Notation for Generally Loaded Foundations",
    Géotechnique, Vol. 47, No. 5, December, ISSN 0016-8505 , pp 1051-1052
    1. Corrigendum: Géotechnique, Vol. 48, No. 1, p 157
    Request a copy by email | doi:10.1680/geot.1997.47.5.1051
  43. Williams, M.S., Thompson, R.S.G. and Houlsby, G.T. (1998)
    "Non-Linear Dynamic Analysis of Offshore Jack-up Units",
    Computers and Structures, Vol. 69, ISSN 0045-7949 , pp 171-180
    Request a copy by email | doi:10.1016/S0045-7949(98)00119-9
  44. Houlsby, G.T. and Puzrin, A.M. (1999)
    "The Bearing Capacity of a Strip Footing on Clay under Combined Loading",
    Proceedings of the Royal Society of London, Series A, Vol. 455, No. 1983, ISSN 1364-5021 , pp 893-916
    Request a copy by email | doi:10.1098/rspa.1999.0340
  45. Gottardi, G., Houlsby, G.T. and Butterfield, R. (1999)
    "The Plastic Response of Circular Footings on Sand under General Planar Loading",
    Géotechnique, Vol. 49, No. 4, ISSN 0016-8505 , pp 453-470
    Request a copy by email | doi:10.1680/geot.1999.49.4.453
  46. Houlsby, G.T. and Sharma, R.S. (1999)
    "A Conceptual Model for the Yielding and Consolidation of Clays",
    Géotechnique, Vol. 49, No. 4, ISSN 0016-8505 , pp 491-502
    Request a copy by email | doi:10.1680/geot.1999.49.4.491
  47. Williams, M.S., Thompson, R.S.G. and Houlsby, G.T. (1999)
    "A Parametric Study of the Non-Linear Dynamic Behaviour of an Offshore Jack-up Unit",
    Engineering Structures, Vol. 21, ISSN 0141-0296 , pp 383-394
    Request a copy by email | doi:10.1016/S0141-0296(97)00222-8
  48. Burd, H.J., Houlsby, G.T., Augarde, C.E. and Liu, G. (2000)
    "Modelling Tunnel-Induced Settlement of Masonry Buildings",
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 143, No. 1, ISSN 1353-2618 , pp 17-30
    Request a copy by email | doi:10.1680/geng.2000.143.1.17

    (Telford Prize, Institution of Civil Engineers, 2001)
  49. Martin, C.M. and Houlsby, G.T. (2000)
    "Combined Loading of Spudcan Foundations on Clay: Laboratory Tests",
    Géotechnique, Vol. 50, No. 4, ISSN 0016-8505 , pp 325-338
    Request a copy by email | doi:10.1680/geot.2000.50.4.325
  50. Houlsby, G.T. and Puzrin, A.M. (2000)
    "A thermomechanical framework for constitutive models for rate-independent dissipative materials",
    International Journal of Plasticity, Vol. 16 No. 9, ISSN 0749-6419 , pp 1017-1047
    Request a copy by email | doi:10.1016/S0749-6419(99)00073-X
  51. Houlsby, G.T. Liu, G. and Augarde, C.E. (2000)
    "A tying scheme for imposing displacement constraints in finite element analysis",
    Communications in Applied Numerical Methods, Vol. 16, No. 10, September, ISSN 1099-0887 , pp 721-732
    Request a copy by email | doi:10.1002/1099-0887(200010)16:10<721::AID-CNM371>3.0.CO;2-A
  52. Houlsby, G.T. and Byrne, B.W. (2000)
    "Suction caisson foundations for offshore wind turbines and anemometer masts",
    Wind Engineering, Vol. 24, No. 4, ISSN 0309-524X , pp 249-255
    Request a copy by email | doi:10.1260/0309524001495611
  53. Liu, G, Houlsby, G.T. and Augarde, C.E. (2001)
    "Two-dimensional analysis of settlement damage to masonry buildings caused by tunnelling",
    The Structural Engineer, Vol. 79, No. 1, January, ISSN 1466-5123 , pp 19-25
    Request a copy by email
  54. Houlsby, G.T. and Byrne, B.W. (2001)
    Discussion on: 'Sieffert, J.-G. and Bay-Gress, Ch. (2000) "Comparison of European bearing capacity calculation methods for shallow foundations", Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 143, pp 65-74',
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 149, ISSN 1353-2618 , pp 63-64
    Request a copy by email | doi:10.1680/geng.149.1.63.39306
  55. Puzrin, A.M., Houlsby, G.T. and Burland, J.B. (2001)
    "Thermomechanical formulation of a small strain model for overconsolidated clays",
    Proceedings of the Royal Society of London, Series A, Vol. 457, No. 2006, February, ISSN 1364-5021 , pp 425-440
    Request a copy by email | doi:10.1098/rspa.2000.0673
  56. Puzrin, A.M. and Houlsby, G.T. (2001)
    "Strain-based plasticity models for soils and the BRICK model as an example of the hyperplasticity approach",
    Géotechnique, Vol. 51, No. 2, March, ISSN 0016-8505 , pp 169-172
    Request a copy by email | doi:10.1680/geot.51.2.169.40289
  57. Porter, M.I. and Houlsby, G.T. (2001)
    "Development of crack size and limit state design methods for edge-abraded glass members",
    The Structural Engineer, Vol. 79, No. 8, April, ISSN 1466-5123 , pp 29-35
    Request a copy by email
  58. Puzrin, A.M. and Houlsby, G.T. (2001)
    "Fundamentals of kinematic hardening hyperplasticity",
    International Journal of Solids and Structures, Vol. 38, No. 21, May, ISSN 0020-7683 , pp 3771-3794
    Request a copy by email | doi:10.1016/S0020-7683(00)00238-9
  59. Puzrin, A.M. and Houlsby, G.T. (2001)
    "On the non-intersection dilemma in multi-surface plasticity",
    Géotechnique, Vol. 51, No. 4, May, ISSN 0016-8505 , pp 369-372
    Request a copy by email | doi:10.1680/geot.51.4.369.39400
  60. Byrne, B.W. and Houlsby, G.T. (2001)
    "Observations of footing behaviour on loose carbonate sands",
    Géotechnique, Vol. 51, No. 5, June, ISSN 0016-8505 , pp 463-466
    Request a copy by email | doi:10.1680/geot.51.5.463.39971
  61. Puzrin, A.M. and Houlsby, G.T. (2001)
    "A thermomechanical framework for rate-independent dissipative materials with internal functions",
    International Journal of Plasticity, Vol. 17, ISSN 0749-6419 , pp 1147-1165
    Request a copy by email | doi:10.1016/S0749-6419(00)00083-8
  62. Cassidy, M.J., Eatock Taylor R. and Houlsby, G.T. (2001)
    "Analysis of jack-up units using a constrained NewWave methodology",
    Applied Ocean Research, Vol. 23, ISSN 0141-1187 , pp 221-234
    Request a copy by email | doi:10.1016/S0141-1187(01)00005-0
  63. Martin, C.M. and Houlsby, G.T. (2001)
    "Combined loading of spudcan foundations on clay: numerical modelling",
    Géotechnique, Vol. 51, No. 8, October, ISSN 0016-8505 , pp 687-700
    Request a copy by email | doi:10.1680/geot.51.8.687.40470
  64. Koumoto, T. and Houlsby, G.T. (2001)
    "Theory and practice of the fall cone test",
    Géotechnique, Vol. 51, No. 8, October, ISSN 0016-8505 , pp 701-712
    Request a copy by email | doi:10.1680/geot.51.8.701.40475
  65. Houlsby, G.T. and Puzrin, A.M. (2002)
    "Rate-dependent plasticity models derived from potential functions",
    Journal of Rheology, Vol. 46, No. 1, January/February, ISSN 0148-6055 , pp 113-126
    Request a copy by email | doi:10.1122/1.1427911
  66. Houlsby, G.T. and Cassidy, M.J. (2002)
    "A plasticity model for the behaviour of footings on sand under combined loading",
    Géotechnique, Vol. 52, No. 2, March, ISSN 0016-8505 , pp 117-129
    Request a copy by email | doi:10.1680/geot.52.2.117.40922

    (David Hislop Award, Institution of Civil Engineers, 2003)
  67. Cassidy, M.J., Taylor, P.H., Eatock Taylor, R. and Houlsby, G.T. (2002)
    "Evaluation of long-term extreme response statistics of jack-up platforms",
    Ocean Engineering, Vol. 29, October, ISSN 0029-8018 , pp 1603-1631
    Request a copy by email | doi:10.1016/S0029-8018(01)00110-X
  68. Byrne, B.W. and Houlsby, G.T. (2002)
    "Experimental investigations of the response of suction caissons to transient vertical loading",
    Proc. ASCE, Journal of Geotechnical Engineering, Vol. 128, No. 11, November, ISSN 1090-0241 , pp 926-939
    Request a copy by email | doi:10.1061/(ASCE)1090-0241(2002)128:11(926)
  69. Cassidy, M.J. and Houlsby, G.T. (2002)
    "Vertical bearing capacity factors for conical footings on sand",
    Géotechnique, Vol. 52, No. 9, November, ISSN 0016-8505 , pp 687-692
    Request a copy by email | doi:10.1680/geot.52.9.687.38836
  70. Cassidy, M.J., Byrne, B.W. and Houlsby, G.T. (2002)
    "Modelling the behaviour of circular footing under combined loading on loose carbonate sand",
    Géotechnique, Vol. 52, No. 10, ISSN 0016-8505 , pp 705-712
    Request a copy by email | doi:10.1680/geot.52.10.705.38846
  71. Byrne, B.W., Houlsby, G.T., Martin, C.M. and Fish, P. (2002)
    "Suction caisson foundations for offshore wind turbines",
    Wind Engineering, Vol. 26, No. 3, ISSN 0309-524X , pp 145-155
    Request a copy by email | doi:10.1260/030952402762056063
  72. Puzrin, A.M. and Houlsby, G.T. (2003)
    "Rate dependent hyperplasticity with internal functions",
    Proceedings of the American Society of Civil Engineers, Journal of the Engineering Mechanics Division, Vol. 129, No. 3, March, ISSN 0733-9399 , pp 252-263
    Request a copy by email | doi:10.1061/(ASCE)0733-9399(2003)129:3(252)
  73. Houlsby, G.T and Martin, C.M. (2003)
    "Undrained bearing capacity factors for conical footings on clay",
    Géotechnique, Vol. 53, No. 5, June, ISSN 0016-8505 , pp 513-520
    Request a copy by email | doi:10.1680/geot.53.5.513.37507
  74. Einav, I., Puzrin, A.M. and Houlsby, G.T. (2003)
    "Numerical studies of hyperplasticity with single, multiple and a continuous field of yield surfaces",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 27, No. 10, ISSN 0363-9061 , pp 837-858
    Request a copy by email | doi:10.1002/nag.303
  75. Einav, I., Puzrin, A.M and Houlsby, G.T. (2003)
    "Continuous hyperplastic models for overconsolidated clays",
    Mathematical and Computer Modelling, (special issue on Mathematical Models in Geomechanics, proceedings of symposium at Scilla di Reggio Calabria, 19-22 September 2000), Vol. 37, No. 5/6, ISSN 0895-7177 , pp 515-523
    Request a copy by email | doi:10.1016/S0895-7177(03)00044-X
    (See also conference poster P4)
  76. Houlsby, G.T. (2003)
    Discussion on 'Al-Shayea, N., Abduljauwad, S., Bashir, R., Al-Ghamedy, H. and Asi, I. (2003) "Determination of parameters for hyperbolic model of soils", Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 156, pp 105-117',
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 156, ISSN 1353-2618 , p 225
    Request a copy by email | doi:10.1680/geng.156.4.225.37534
  77. Cassidy, M.J., Houlsby, G.T. and Eatock Taylor, R. (2003)
    "Probabilistic models applicable for the short term extreme response analysis of jack-up platforms",
    Journal of Offshore Mechanics and Arctic Engineering, Trans. ASME, Vol. 125, No. 4, November, ISSN 0892-7219 , pp 249-263
    Request a copy by email | doi:10.1115/1.1600470
  78. Byrne, B.W. and Houlsby, G.T. (2003)
    "Foundations for offshore wind turbines",
    Philosophical Transactions of the Royal Society of London, Series A, Vol. 361, December, ISSN 1364-503X , pp 2909-2930
    Request a copy by email | doi:10.1098/rsta.2003.1286
  79. Byrne, B.W. and Houlsby, G.T. (2004)
    "Experimental investigations of the response of suction caissons to transient combined loading",
    Proc. ASCE, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 130, No. 3, ISSN 1090-0241 , pp 240-253
    Request a copy by email | doi:10.1061/(ASCE)1090-0241(2004)130:3(240)
  80. Cassidy, M.J., Martin, C.M. and Houlsby, G.T. (2004)
    "Development and application of force resultant models describing jack-up foundation behaviour",
    Marine Structures, (special issue on Jack-up Platforms: Papers from 9th Int. Conf. on Jack-Up Platform Design, Construction and Operation, September 23-24, City University, London), Vol. 17, No. 3-4, May-August, ISSN 0951-8339 , pp 165-193
    Request a copy by email | doi:10.1016/j.marstruc.2004.08.002
  81. Houlsby, G.T. and Byrne, B.W. (2005)
    "Design procedures for installation of suction caissons in clay and other materials",
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 158, No. GE2, April, ISSN 1353-2618 , pp 75-82
    Request a copy by email | doi:10.1680/geng.158.2.75.61630
  82. Houlsby, G.T., Kelly, R.B., Huxtable, J. and Byrne, B.W. (2005)
    "Field trials of suction caissons in clay for offshore wind turbine foundations",
    Géotechnique, Vol. 55, No. 4, May, ISSN 0016-8505 , pp 287-296
    Request a copy by email | doi:10.1680/geot.55.4.287.65487

    (Halcrow Prize, Institution of Civil Engineers, 2006)
  83. Houlsby, G.T., Amorosi, A. and Rojas, E. (2005)
    "Elastic moduli of soils dependent on pressure: a hyperelastic formulation",
    Géotechnique, Vol. 55, No. 5, June, ISSN 0016-8505 , pp 383-392
    Request a copy by email | doi:10.1680/geot.55.5.383.66021
  84. Houlsby, G.T. and Byrne, B.W. (2005)
    "Design procedures for installation of suction caissons in sand",
    Proceedings of the Institution of Civil Engineers, Geotechnical Engineering, Vol. 158, No. GE3, July, ISSN 1353-2618 , pp 135-144
    Request a copy by email | doi:10.1680/geng.158.3.135.66297
  85. Houlsby, G.T, Cassidy, M.J. and Einav, I. (2005)
    "A generalised Winkler model for the behaviour of shallow foundations",
    Géotechnique, Vol. 55, No. 6, June, ISSN 0016-8505 , pp 449-460
    Request a copy by email | doi:10.1680/geot.2005.55.6.449
  86. Augarde, C.E., Burd, H.J. and Houlsby, G.T. (2005)
    Discussion on: 'Franzius, J.N., Potts, D.M, Addenbrooke, T.I. and Burland, J.B. (2004) "The influence of building weight on tunnelling-induced ground and building deformation", Soils and Foundations, Vol. 44, No. 1, pp 25-38',
    Soils and Foundations, Vol. 45, No. 4, ISSN 0038-0806 , pp 166-167
    Request a copy by email
  87. Korsunsky, A.M., Nguyen, G.D. and Houlsby, G.T. (2005)
    "Analysis of essential work of rupture using non-local damage-plasticity modelling",
    International Journal of Fracture, Vol. 135, Nos. 1-4, September, ISSN 0376-9429 (print), 1573-2673 (online) , pp L19-L26
    Request a copy by email | doi:10.1007/s10704-005-4391-z
  88. Doherty, J.P., Houlsby, G.T. and Deeks, A.J. (2005)
    "Stiffness of flexible caisson foundations embedded in non-homogeneous elastic soil",
    Proc. ASCE, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 131, No. 12, December, pp 1498-1508
    Request a copy by email | doi:10.1061/(ASCE)1090-0241(2005)131:12(1498)
  89. Houlsby, G.T., Kelly, R.B., Huxtable, J. and Byrne, B.W. (2006)
    "Field trials of suction caissons in sand for offshore wind turbine foundations",
    Géotechnique, Vol. 56, No. 1, January, ISSN 0016-8505 , pp 3-10
    Request a copy by email | doi:10.1680/geot.2006.56.1.3
  90. Likitlersuang, S. and Houlsby, G.T. (2006)
    "Development of hyperplasticity models for soil mechanics",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 30, No. 3, ISSN 1096-9853 , pp 229-254
    Request a copy by email | doi:10.1002/nag.484
  91. Simoni, A. and Houlsby, G.T. (2006)
    "The direct shear strength and dilatancy of sand-gravel mixtures",
    Geotechnical and Geological Engineering, Vol. 24, No. 3, ISSN 0960-3182 (print) 1573-1529 (online) , pp 523-549
    Request a copy by email | doi:10.1007/s10706-004-5832-6
  92. Bienen, B., Byrne, B.W., Houlsby, G.T., and Cassidy, M.J. (2006)
    "Investigating six-degree-of-freedom loading of shallow foundations on sand",
    Géotechnique, Vol. 56, No. 6, July, ISSN 0016-8505 , pp 367-379
    1. Reply to discussion by D.V. Morris: Géotechnique, Vol. 57, No. 5, pp 483-484
    Request a copy by email | doi:10.1680/geot.2006.56.6.367
  93. Houlsby, G.T. (2006)
    Discussion on: 'Benmebarek, N., Benmebarek, S., Kastner, R. and Soubra, A.-H. (2006) "Passive and active earth pressures in the presence of groundwater flow", Géotechnique, Vol. 56, No. 3, pp 149-158',
    Géotechnique, Vol. 56, No. 7, September, ISSN 0016-8505 , pp 521-522
    Request a copy by email | doi:10.1680/geot.2006.56.7.521
  94. Kelly, R.B., Houlsby, G.T. and Byrne, B.W. (2006)
    "A comparison of field and laboratory tests of caisson foundations in sand and clay",
    Géotechnique, Vol. 56, No. 9, November, ISSN 0016-8505 , pp 617-626
    Request a copy by email | doi:10.1680/geot.2006.56.9.617
  95. Kelly, R.B., Houlsby, G.T. and Byrne, B.W. (2006)
    "Transient vertical loading of model suction caissons in a pressure chamber",
    Géotechnique, Vol. 56, No. 10, December, ISSN 0016-8505 , pp 665-675
    Request a copy by email | doi:10.1680/geot.2006.56.10.665
  96. Einav, I., Houlsby, G.T. and Nguyen, G.D. (2007)
    "Coupled damage and plasticity models derived from energy and dissipation potentials",
    International Journal for Solids and Structures, Vol. 44, Issues 7-8, April, pp 2487-2508
    Request a copy by email | doi:10.1016/j.ijsolstr.2006.07.019
  97. Nguyen, G.D. and Houlsby, G.T. (2007)
    "Nonlocal damage modelling of concrete: a procedure for the determination of model parameters",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 31, No. 7, June, ISSN 1096-9853 , pp 867-891
    Request a copy by email | doi:10.1002/nag.563
  98. Likitlersuang, S. and Houlsby, G.T. (2007)
    "Predictions of a continuous hyperplasticity model for Bangkok Clay",
    Geomechanics and Geoengineering, Vol. 2, No. 3, September, ISSN 1748-6025 (print) 1748-6033 (online) , pp 147-157
    Request a copy by email | doi:10.1080/17486020701561479
  99. Nguyen, G.D. and Houlsby, G.T. (2008)
    "A coupled damage-plasticity model for concrete based on thermodynamic principles: Part I: Model formulation and parameter identification",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 32, No. 4, March, ISSN 1096-9853 , pp 353-389 (First available online 20 July 2007)
    Request a copy by email | doi:10.1002/nag.627
  100. Nguyen, G.D. and Houlsby, G.T. (2008)
    "A coupled damage-plasticity model for concrete based on thermodynamic principles: Part II: Non-local regularization and numerical implementation",
    International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 32, No. 4, March, ISSN 1096-9853 , pp 391-413 (First available online 9 August 2007)
    Request a copy by email | doi:10.1002/nag.649
  101. Salgado, R., Houlsby, G.T. and Cathie, D.N. (2008)
    "Contributions to Géotechnique 1948-2007: Foundation engineering",
    Géotechnique, Vol. 58, No. 5, June, ISSN 0016-8505 (print) 1751-7656 (online) , pp 369-375
    1. Reprinted in "The essence of geotechnical engineering: 60 years of Géotechnique", ed. J.H. Atkinson, Thomas Telford, pp 61-67
    Request a copy by email | doi:10.1680/geot.2008.58.5.369
  102. Houlsby, G.T. (2009)
    "Potential particles: a method for modelling non-circular particles in DEM",
    Computers and Geotechnics, Vol. 36, No. 6, July, pp 953-959 (First available online 4 March 2009)
    Request a copy by email | doi:10.1016/j.compgeo.2009.03.001
  103. Villalobos, F., Byrne, B.W. and Houlsby, G.T. (2009)
    "An Experimental Study of the Drained Capacity of Suction Caisson Foundations under Monotonic Loading for Offshore Applications",
    Soils and Foundations, Vol. 49, No. 3, June, pp 477-488
    Request a copy by email
  104. Likitlersuang, S. , Houlsby, G.T. and Chompoorat, T. (2009)
    "Model for shear response of asphaltic concrete at different shear rates and temperatures",
    Proceedings of the American Society of Civil Engineers, Journal of Engineering Mechanics, Vol. 135, No. 11, November, pp 1257-1264 (First available online 15 October 2009)
    Request a copy by email | doi:10.1061/(ASCE)0733-9399(2009)135:11(1257)
  105. LeBlanc, C., Houlsby, G.T. and Byrne, B.W. (2010)
    "Response of Stiff Piles in Sand to Long-term Cyclic Lateral Loading",
    Géotechnique, Vol. 60, No. 2, February, ISSN 0016-8505 (print) 1751-7656 (online) , pp 79-90 (First available online 15 December 2009)
    Request a copy by email | doi:10.1680/geot.7.00196

    (TK Hseih Award, Institution of Civil Engineers, 2011)
  106. Pickhaver, J.A., Burd, H.J. and Houlsby, G.T. (2010)
    "An equivalent beam method to model masonry buildings in 3D finite element analysis",
    Computers and Structures, Vol. 88, Nos. 19-20, pp 1049-1063 (First available online 15 July 2010)
    Request a copy by email | doi:10.1016/j.compstruc.2010.05.006
  107. LeBlanc, C., Byrne, B.W. and Houlsby, G.T. (2010)
    "Response of Stiff Piles to Random Two-Way Lateral Loading",
    Géotechnique, Vol. 60, No. 9, September, ISSN 0016-8505 (print) 1751-7656 (online) , pp 715-721 (First available online 26 April 2010)
    Request a copy by email | doi:10.1680/geot.09.T.011
  108. Draper, S., Houlsby, G.T., Oldfield, M.L.G. and Borthwick, A.G.L. (2010)
    "Modelling Tidal Energy Extraction in a Depth-Averaged Coastal Domain",
    Proc. Institution of Engineering and Technology, Renewable Power Generation, Vol. 4, No. 6, ISSN 1752-1416 (print) 1752-1424 (online) , pp 545-554 (First available online 30 July 2010)
    Request a copy by email | doi:10.1049/iet-rpg.2009.0196
  109. McAdam, R.A., Houlsby, G.T., Oldfield, M.L.G. and McCulloch, M.D. (2010)
    "Experimental Testing of the Transverse Horizontal Axis Water Turbine",
    Proc. Institution of Engineering and Technology, Renewable Power Generation, Vol. 4, No. 6, ISSN 1752-1416 (print) 1752-1424 (online) , pp 510-518 (First available online 30 July 2010)
    Request a copy by email | doi:10.1049/iet-rpg.2009.0194
  110. Villalobos, F. Byrne, B.W and Houlsby, G.T. (2010)
    "Model testing of suction caissons in clay subjected to vertical loading",
    Applied Ocean Research, Vol. 32, No. 4, October, ISSN 0141-1187 , pp 414-424 (First available online 2 October 2010)
    Request a copy by email | doi:10.1016/j.apor.2010.09.002
  111. Houlsby, G.T. and Cassidy, M.J. (2011)
    "A simplified mechanically based model for predicting partially drained behaviour of penetrometers and shallow foundations",
    Géotechnique Letters, ISSN 2045-2543 (online) (First available online 22 August)
    Request a copy by email | doi:10.1680/geolett.11.00031
  112. Boon, C.W., Houlsby, G.T. and Utili, S. (2012)
    "A New Algorithm for Contact Detection between Convex Polygonal and Polyhedral Particles in the Discrete Element Method",
    Computers and Geotechnics, Vol. 44, No. 3, pp 73-82 (First available online 25 April 2012)
    Request a copy by email | doi:10.1016/j.compgeo.2012.03.012
  113. Zhu, B., Byrne, B.W. and Houlsby, G.T. (2013)
    "Long term lateral cyclic response of suction caisson foundations in sand",
    Proc. ASCE, Journal of Geotechnical and Geoenvironmental Engineering, Vol. 139, No. 1, pp 73-83 (First available online 26 March 2012)
    Request a copy by email | doi:10.1061/(ASCE)GT.1943-5606.0000738
  114. Draper, S., Borthwick, A.G.L. and Houlsby, G.T. (2013)
    "Energy Potential of a Tidal Fence Deployed Near a Coastal Headland",
    Philosophical Transactions of the Royal Society of London, Series A, Vol. 371, Article 20120176, ISSN 1364-503X (First available online 14 January 2013)
    Request a copy by email | doi:10.1098/rsta.2012.0176
  115. Boon, C.W., Houlsby, G.T. and Utili, S. (2013)
    "A New Contact Detection Algorithm for Three-Dimensional Non-Spherical Particles",
    Powder Technology, Vol. 248, pp 94-102 (First available online 25 December 2012)
    Request a copy by email | doi:10.1016/j.powtec.2012.12.040
  116. McAdam, R., Houlsby, G.T. and Oldfield, M.L.G. (2013)
    "Experimental Measurements of the Hydrodynamic Performance and Structural Loading of the Transverse Horizontal Axis Water Turbine: Part 1",
    Renewable Energy, Vol. 59, pp 105-114 (First available online 16 April 2013)
    Request a copy by email | doi:10.1016/j.renene.2013.03.016
  117. McAdam, R., Houlsby, G.T. and Oldfield, M.L.G. (2013)
    "Experimental Measurements of the Hydrodynamic Performance and Structural Loading of the Transverse Horizontal Axis Water Turbine: Part 2",
    Renewable Energy, Vol. 59, pp 141-159 (First available online 19 April 2013)
    Request a copy by email | doi:10.1016/j.renene.2013.03.015
  118. McAdam, R., Houlsby, G.T. and Oldfield, M.L.G. (2013)
    "Experimental Measurements of the Hydrodynamic Performance and Structural Loading of the Transverse Horizontal Axis Water Turbine: Part 3",
    Renewable Energy, Vol. 59, pp 82-91 (First available online 12 March 2013)
    Request a copy by email | doi:10.1016/j.renene.2013.03.012
  119. Adcock, T.A.A., Draper, S., Houlsby, G.T., Borthwick, A.G.L. and Serhadlıoğlu, S. (2013)
    "The available power from tidal stream turbines in the Pentland Firth",
    Proceedings of the Royal Society of London, Series A, Vol. 469, No. 2157, Article 20130072, ISSN 1364-503X (First available online 10 July 2013)
    Request a copy by email | doi:10.1098/rspa.2013.0072
  120. Houlsby, N.M.T. and Houlsby, G.T. (2013)
    "Statistical fitting of undrained strength data",
    Géotechnique, Vol. 63, No. 14, ISSN 0016-8505 (print) 1751-7656 (online) , pp 1253-1263 (First available online 16 July 2013)
    Request a copy by email | doi:10.1680/geot.13.P.007
  121. Belloni, C.S.K., Willden, R.H.J. and Houlsby, G.T. (2013)
    "A Numerical Analysis of Bidirectional Ducted Tidal Turbines in Yawed Flow",
    Marine Technology Society Journal, Vol. 47, No. 4, pp 23-35
    Request a copy by email
  122. Serhadlıoğlu, S., Adcock, T.A.A., Houlsby, G.T., Draper, S. and Borthwick, A.G.L. (2013)
    "Tidal Stream Energy Resource Assessment of the Anglesey Skerries",
    International Journal of Marine Energy, Issue 3-4, ISSN 2214-1669 , pp e98-e111 (First available online 14 November 2013)
    Request a copy by email | doi:10.1016/j.ijome.2013.11.014
  123. Dong, Y., Burd, H.J., Houlsby, G.T. and Hou, Y. (2014)
    "Advanced Finite Element Analysis of a Complex Deep Excavation Case History in Shanghai",
    Frontiers of Civil and Structural Engineering, Vol. 8, No. 1, pp 93-100 (First available online 17 January 2014)
    Request a copy by email | doi:10.1007/s11709-014-0232-3
  124. Draper, S., Adcock, T.A.A., Borthwick, A.G.L. and Houlsby, G.T. (2014)
    "An Electrical Analogy for the Pentland Firth Tidal Stream Power Resource",
    Proceedings of the Royal Society, Series A, Vol. 470, No. 2161, Article 20130207(First available online 7 November 2013)
    Request a copy by email | doi:10.1098/rspa.2013.0207
  125. Draper, S., Adcock, T.A.A., Borthwick, A.G.L. and Houlsby, G.T. (2014)
    "Estimate of the Tidal Stream Power Resource of the Pentland Firth",
    Renewable Energy, Vol. 63, March, pp 650-657 (First available online 7 November 2013)
    Request a copy by email | doi:10.1016/j.renene.2013.10.015
  126. Houlsby, G.T. (2014)
    "John Wallis and the Numerical Analysis of Structures",
    Nexus Network Journal, Vol. 16, No. 1, ISSN 1590-5896 (print) 1522-4600 (online) , pp 207-217 (First available online 5 March 2014)
    Request a copy by email | doi:10.1007/s00004-014-0179-7
  127. Adcock, T.A.A, Draper, S., Houlsby, G.T., Borthwick, A.G.L. and Serhadlıoğlu, S. (2014)
    "Tidal stream power in the Pentland Firth - long-term variability, multiple constituents and capacity factor",
    Proc. I.Mech.E. Part A, Journal of Power and Energy, Vol. 228, No. 8, pp 854-861 (First available online 24 June 2014)
    Request a copy by email | doi:10.1177/0957650914544347
  128. Draper, S., Adcock, T.A.A., Borthwick, A.G.L. and Houlsby, G.T. (2014)
    "A note on the power potential of tidal currents in channels",
    International Journal of Marine Energy, Vol. 6, pp 1-17 (First available online 13 May 214)
    Request a copy by email | doi:10.1016/j.ijome.2014.05.001
  129. Boon, C.W., Houlsby, G.T. and Utili, S. (2014)
    "New insights into the 1963 Vajont slide using 2D and 3D Distinct Element Method analyses",
    Géotechnique, Vol. ???, No. ???, ???, pp ???-??? (First available online 21 October 2014)
    Request a copy by email | doi:10.1680/geot.14.P.041
  130. Zhao, T., Houlsby, G.T. and Utili, S. (2014)
    "Investigation of granular batch sedimentation via DEM-CFD coupling",
    Granular Matter, Vol. 16, Issue 6, pp 921-932 (First available online 12 November 2014)
      | doi:10.1007/s10035-014-0534-0
  131. Utili, S., Zhao, T. and Houlsby, G.T. (2015)
    "3D DEM investigation of granular column collapse: Evaluation of debris motion and its destructive power",
    Engineering Geology, Vol. 186, February, pp 3-16 (First available online 3 September 2014)
    Request a copy by email | doi:10.1016/j.enggeo.2014.08.018
  132. Boon, C.W., Houlsby, G.T. and Utili, S. (2015)
    "Designing Tunnel Support in Jointed Rock Masses Via the DEM",
    Rock Mechanics and Rock Engineering, Vol. 48, Issue 2, March, pp 603-632 (First available online 13 April 2014)
    Request a copy by email | doi:10.1007/s00603-014-0579-8
  133. Boon, C.W., Houlsby, G.T. and Utili, S. (2015)
    "A new rock slicing algorithm based on linear programming",
    Computers and Geotechnics, Vol. 65, pp 12-29 (First available online 12 December 2014)
    Request a copy by email | doi:10.1016/j.compgeo.2014.11.007
  134. Byrne, B.W. and Houlsby, G.T. (2015)
    "Helical piles: an innovative foundation design option for offshore wind turbines",
    Philosophical Transactions of the Royal Society of London, Vol. 373, Issue 2035, February (First available online 12 January 2015)
    Request a copy by email | doi:10.1098/rsta.2014.0081
  135. Boon, C.W., Houlsby, G.T. and Utili, S. (2015)
    "DEM modelling of jointed rock beam with emphasis on interface properties",
    Géotechnique Letters, Vol. 5, Issue January-March, May, ISSN 2045-2543, pp 49-55
    Request a copy by email | doi:10.1680/geolett.14.00105
  136. Doherty, P., Igoe, D., Murphy, G., Gavin, K., Preston, J., McAvoy, C., Byrne, B.W., McAdam, R., Burd, H.J., Houlsby, G.T., Martin, C.M., Zdravković, L., Taborda, D.M.G., Potts, D.M., Jardine, R.J., Sideri, M., Schroeder, F.C., Muir Wood, A., Kallehave, D. and Skov Gretlund, J. (2015)
    "Field validation of fibre Bragg grating sensors for measuring strain on driven steel piles",
    Géotechnique Letters, Vol. 5, Issue April-June, July, ISSN 2045-2543, pp 74-79
    Request a copy by email | doi:10.1680/geolett.14.00120
  137. Dong, Y.P., Burd, H.J. and Houlsby, G.T. (2016)
    "Finite element analysis of a deep excavation case history",
    Géotechnique, Vol. 66, No. 1, January, ISSN 0016-8505, pp 1-15 (First available online 15 September 2015)
    Request a copy by email | doi:10.1680/jgeot.14.P.234
  138. Vogel, C.R., Houlsby, G.T. and Willden, R.H.J. (2016)
    "Effect of free surface deformation on the extractable power of a finite width turbine array",
    Renewable Energy, Vol. 88, pp 317-324 (First available online 7 December 2015)
    Request a copy by email | doi:10.1016/j.renene.2015.11.050
  139. Houlsby, G.T. and Vogel, C.R. (2016)
    "The power available to tidal turbines in an open channel flow",
    Proceedings of the Institution of Civil Engineers, Energy, ahead of print (First available online 16 May 2016)
    Request a copy by email | doi:10.1680/jener.15.00035
  140. Houlsby, G.T. (2016)
    54th Rankine Lecture: "Interactions in offshore foundation design",
    Géotechnique, Vol. 66, No. 10, pp 791-825 (First available online 17 August 2016)
    Request a copy by email | doi:10.1680/jgeot.15.RL.001
  141. Bloodworth, A.G. and Houlsby, G.T. (2016)
    "Analysis of pre-vault tunnelling interaction with buildings",
    Geotechnical Engineering, ahead of print (First available online 8 December 2016)
    Request a copy by email | doi:10.1680/jgreen.15.00176

Papers in press

  1. Belloni, C.S.K., Willden, R.H.J. and Houlsby, G.T. (2015)
    "An investigation of ducted and open-centre tidal turbines employing CFD-embedded BEM",
    Renewable Energy, accepted for publication and in press

Papers submitted for publication

  1. Dong, Y.P., Burd, H.J. and Houlsby, G.T. (2015)
    "Finite element parametric study of the performance of a deep excavation",
    Submitted for publication to International Journal for Numerical and Analytical Methods in Geomechanics
  2. Dong, Y.P., Burd, H.J. and Houlsby, G.T. (2015)
    "Finite element study of deep excavation construction processes",
    Submitted for publication to Soils and Foundations
  3. Houlsby, G.T. (2016)
    "Frictional plasticity in a convex analytical setting",
    Submitted for publication to Géotechnique
  4. Vogel, C.R., Willden, R.H.J. and Houlsby, G.T. (2016)
    "Power available from a depth-averaged simulation of a tidal turbine array",
    Submitted for publication to Renewable Energy